| |
|
|
|
|
|
GX Screw conveyor is a general-purpose screw conveyor,it applicablity of strong,fleexible inlet and outlet layout position with low noise easy operation and maintenance. It has S-type(with the of the spiral screw)and D system (with spiral belt ,or can be used to tilt the level(less than 20oC)transport all kinds of powder,granular and small block materials,such as pulverized coal,flour,cement,sand,bulk grain,such as small lump coal and stone.Temperature of their working environment ad 20degrees to+50 degrees,the transportation of materials should be lower than the temperature of +200degree.Main parameters of the table below.
GX series screw conveyor main technology parameter list:
|
机器型号Model |
GX150 |
GX200 |
GX250 |
GX300 |
GX400 |
GX500 |
GX600 |
|
螺旋直径Screw diameter(mm) |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
|
螺距Screw pitch(mm) |
120 |
160 |
200 |
240 |
320 |
400 |
480 |
|
转速Speed(rmp) |
31-129 |
31-114 |
31-102 |
31-88 |
31-88 |
31-75 |
31-59 |
|
输送量Conveying capacity(m3/h) |
1.3-5.5 |
3.1-11 |
6-20 |
10-30 |
25-71 |
49-118 |
85-162 |
|
许用千瓦转速比The KW allowable speed ratio |
0.013 |
0.03 |
0.06 |
0.1 |
0.25 |
0.48 |
0.85 |
|
许用悬臂载荷Allowable load cantilever(kg) |
210 |
370 |
580 |
800 |
1500 |
2400 |
3500 |
|
注：表中的输送量按填充系y=0.45考虑，选型时请根据具体物料选取填充系数yc对输送量进行修正。
Note:The capacity in the table is considered with the filling factor y=0.45.Accirdubg to the specific materials ,please select the filling factor y to amend. | |
|
|
|
|
